U14313 Used Yaesu FT-101E SSB Transceiver

Rust and scratches are prevalent throughout the radio. The dials on the front mostly have dust buildup on them and around some of the switches. The main dial handle is missing, but it still turns nicely. There is also dust throughout the inside of the radio. The front of the radio has plastic covering on it.  The two back feet are missing from the bottom of the radio.  The four feet on the side of the radio are intact and in fine shape.  The handle is attached to the radio securely.  It is a little torn in a couple spots as far as the leather covering.   The hand mic is not original.  It is a Galaxy mic and also has dust. The finals are a little soft but still makes 80 watts or so.  It receives but I am sure it needs an alignment and some TLC

S/N: 6E314961

AS IS no warranty

From the manufacturer: 

The Yaesu FT-101E is a solid-state (except finals) transceiver covering 160 through 10 meters in USB, LSB, CW and AM modes. The analog display provides 2 kHz accuracy. An eight-pole SSB filter reduces QRM. Input power is 260 watts PEP on SSB, 180 watts on CW (50% duty cycle) and 80 watts AM (lower on 160 and 10 meters). It operates from 12 VDC 20 amps or 100-234 VAC. There is also an AUX range crystal position for any 500 kHz segment from 14.5-28 MHz.